How may I check the status on my existing order?

First click this link and log into your >>Stonycreek Account<<, log in and see if the item has shipped and its delivery confirmation number will be posted. If there is no shipping information there, email us for the latest shipping info.


What is Stonycreek’s warranty?

All of Stonycreek’s items are warranted against manufacturing defects for as long as you own them. Normal wear and tear is not covered. 9mm Drum magazines are covered for one year from date of purchase.


What forms of payment do you accept?

We accept MASTERCARD and VISA credit cards.

We also accept money orders. Personal checks are held until cleared. Make money orders out to "Stonycreek Armory".

We also accept credit cards via phone, regular snail mail and email as well.

We do not use, like or support the evil paypal. paypal is very anti-gun. You may read more about thier anti-gun type trade practices by visiting "paypalsucks" web site here>
www.paypalsucks.com


Will my credit card information be seen by people that work at Stonycreek? and How secure is the information you have about my bank account?
We never see any credit card informaton here. All information is handled by our electronic funds transfer company Autnorize.net They have hundreds of thousands of accounts worldwide.

You may see thier privacy and security information here>
http://www.authorize.net/company/privacy/#security

Secure Shopping

You can shop at Stonycreek Armory online with confidence. We have partnered with Authorize.Net, a leading payment gateway since 1996, to offer safe and secure credit card and electronic check transactions for our customers.

The Authorize.Net Payment Gateway manages the complex routing of sensitive customer information through the credit card and electronic check processing networks (see an online payments diagram)
The company adheres to strict industry standards for payment processing, including:
*128-bit Secure Sockets Layer (SSL) technology for secure Internet Protocol (IP) transactions.
*Industry leading encryption hardware and software methods and security protocols to protect customer information.
*Compliance with the Payment Card Industry (PCI) Data Security Standard.

For additional information regarding the privacy of your sensitive cardholder data, please read the Authorize.Net Privacy Policy

Stonycreek Armory is registered with the Authorize.Net Secure Payments Seal program.

How may I contact Stonycreek?

The most convenient and fastest way is by email at products@stonycreekarmory.com but you may reach us by phone/FAX at 203-238-3200 or snail mail at:

S.C.A.
994 North Colony Rd.
PMB-345
Wallingford, CT. 06492

How can I start to research the laws regarding the items I’m thinking about purchasing from Stonycreek Armory? (it is the purchasers responsibility to be 100% sure thier purchase from SCA is legal in thier area!)

The best place to start is you local, state police agencies and firearms stores.

The NRA has a lot of legal information on their web site here:
http://www.nraila.org/Gun Laws/Default.aspx

http://nraila.org/GunLaws/#


How do I purchase items from your web site?

Go to our "Buy Here" area and click on the category of the firearm or accessory you would like to accessorize, ie: M11, M11A1, M10, Stocks, grips, shotgun, M16, etc.

Then browse the pages viewing the pictures until you find the item(s) you are interested in ordering.
Under each picture is a "BUY NOW" or "ADD TO CART" button, click on this and follow the easy directions. You may "check out" or "continue shopping".
When you have made all your choices, you may also enclose a note with your order to specify anything you are not sure was covered with the checkout directions like caliber, sighting system choice, etc.
You may also follow up the order with an email directly to us to 100% sure we have your exact order and send you the correct product for your application.


What if I’m still having trouble placing an order?

Just send us off an email and explain what you would like to order and we will assist you.You may include your phone number so we may speak with you for more complex issues.

mailto:products@stonycreekarmory.com

>>I live in California, District of Columbia, Hawaii, Maryland, New Jersey or New York or outside the U.S.
May I purchase an upper receiver or spare parts from Stonycreek?

Sorry, we do not ship any upper receivers, machine gun parts or magazines with a capacity of over ten rounds to these states as thier laws are strict and ever changing.
We do not ship ANYTHING outside of the U.S.A.


I am interested in your Tactical front grips. What are your grips dimensions?

The overall length is 6-3/4" for the full sized grips and 5" for the special ops grip. The actual grip section where your hand fits is 4"or 3 1/2" and they are 1-1/2" thick. They are made from one piece of 6061 Aircraft grade Aluminum. See our many photos of these awesome new grips to see that they are the perfect length.
The Tactical front grips use the .400" barrel flange to
hold securely to the barrel. This flange is sometimes called the barrels
"boss". Most MAC Sonic's type suppressors have a flat rear end cap that does
not cover the barrels flange. in this case the Tri-rail will work great,
some Bowers type suppressors with a rear end cap that is flared and covers
the barrels flange will not work properly as the Tri-rail needs that area to
hold on to the barrel.



What types of suppressors work with your Tactical front grips and Tri-Rail systems?

We have designed our grips to function with original Sonic's type M.A.C. and Bowers older style suppressors. Krink cans and newer style Bowers suppressors that have the rear end cap flanged to cover the barrels boss and fit up tightly against the receiver will not work properly with our grips.

The Tri-rail modular mounting system and the Tactical front grips use the .400" barrel flange to
hold securely to the barrel. This flange is sometimes called the barrels
"boss". Most MAC Sonic's type suppressors have a flat rear end cap that does
not cover the barrels flange. in this case the Tri-rail will work great,
some Bowers type suppressors with a rear end cap that is flared and covers
the barrels flange will not work properly as the Tri-rail needs that area to
hold on to the barrel.


Some others grips may need custom fitting. Put on the new grip and screw on your suppressor before tightening the grip. Be sure your suppressor fits on straight and has enough of the barrel inside before shooting. Remove the upper and look through from the rear to check for alignment. Then tighten the grip.


The Stonycreek Tri-Rail system looks great! Can I use this with my semi-auto pistol?

The Tri-rail modular mounting system may be used on any M11 or M10 firearm with a 6" barrel. This works great with laser sights and Tactical lights. Vertical grips may only be added to SMG's.

The problem is when you want to put a front grip on ANY semi-auto pistol. The BATF says adding a front grip to any semi-auto pistol is a big "NO-NO" unless the pistol is registered as an A.O.W.

What are the laws regarding AR stock adapters or stocks install on SEMI AUTO fireams?
Only add a stock to a firearm with at least a 16" barrel! Check all local, state and federal laws.
Adding any butt stock to any semi auto pistol will violate local, state and federal laws unless it is registered as a SBR, short barreled rifle or it has at least a 16" barrel installed.

What types of firearms work with your Side cocker uppers?

S.W.D., M.A.C., RPB, New Jersey Arms, Stephensville Texas Macs.
Powder Springs firearms will work with our M10 uppers if you use a special two-piece receiver pin.


Are Bolt assemblies included with your Side cocker uppers?

You simply use the OEM original bolt that came with your firearm. If you need a new one, we can supply that at a nominal fee. Our M11/9 SMG fixed firing pin bolt assemblies are the best on the market and will greatly improve the function and performance of your submachine gun.


Does the Side Cocking Handle move back and fourth while shooting?

No, that is one of the many advantages of the Side Cocker uppers. Also, without the top cockers groove along the top of the receiver, you will not have hot gases blasting you in the face while shooting.


What shipping company do you use?

We normally use the U.S. postal service "USPS" unless otherwise requested.

All items over $100 will now be shipped SIGNATURE REQUIRED and Priority Mail service.

We ship all our items in plain cardboard boxes with "S.C.A." as the return address name.


Can I visit your showroom or factory?

Sorry, our facilities are not open to the public but you may see our items in person at many gun shows or at New England Outfitters in Wallingford, CT. or Qubetas field and stream store in Middlefield, CT.


I just received my new S.C.A. product and I am not 100% sure on how to use or install them.

Simply send us an email with any questions you may have. We try to respond within 24 hours.


I have a problem with my new item, may I return it?

Please email or phone us first as most problems can be corrected by email or over the phone. If there is still a problem, do not shoot the firearm. We will email you with proper shipping directions and a return invoice number. We want you to be 100% satisfied with your S.C.A. products.


I have noticed that there are other web sites that sell MAC/COBRAY accessories. Why should I purchase parts and accessories from S.C.A.?

Stonycreek Armory is the most trusted and reliable name in MAC/COBRAY accessories. We were the very first company to offer the H&K MP5 adjustable sighting system on the Side Cocker Upper. We have perfected this operation and our great reputation is nation wide. We also CNC machine all our parts including the front H&K sights and rear riser platform so cheap square tubing is not used.
We are the very first company to design the two section ATF approved. patent pending Suomi-MAC upper receiver conversion kit.

We have been manufacturing Aircraft parts for many years and our super tight tolerances and high quality workmanship shows up on our firearms parts. One look at our machining center photos and you will see the see the high level of expertise involved in our parts design and construction. Only the most skilled machinists and best equipment is used.

All aluminum parts are Anodized black to Mil-specs. All steel parts are manganese parkerized and/or coated with baked on, super tough finishes used by the military world wide.

Our raised MP5 sights match our butt stocks for a perfect check weld and comfortable shooting position.
We test shoot new ideas daily and and compete in area subgun matches so nothing but the best, toughest and most accurate products will do.

The huge success and popularity of Stonycreek Armory world wide has made us the leader in custom MAC/COBRAY parts and accessories!
The new items we have available now and the yet to be released items will ensure Stonycreek Armory's lead in the world firearms market place for years to come.
Our commitment to continuous improvement and better customer satisfaction will prove Stonycreek's resolve to stay number one.

We are always here for you day or night by email , phone or fax. We are here for the long run and value you as a customer and a friend.


Most of S.C.A.s photographs are very plain with zero computer effects. Why don’t you use computer enhancements like some other web sites?

Here at S.C.A we want you to see the real item, not some "cartoon" of the item. Anyone can add effects or enhance a picture by computer but we pride ourselves in showing you a real part, in a real photograph. You may want to visit a few of the internet message boards to see the reviews on us and the other companies. Also, see our "customer email" section with tons of product reviews from our customers.


I want to see more pictures of your products. Where can I find them?

We have our Stonycreek SMG group with 225+ more photographs of our products and customers firearms. On the web sites front page, you will see "Stonycreek’s SMG Group" click there and you will go directly to the group. It is at this address also http://groups.yahoo.com/group/stonycreekarmory/

You can view more pictures at our "Stony's pictures" section on the main web site for five pages of pictures.


I am also interested in TEC9's do you have a group for them?

Yes we do. You will find our >TEC9 group< with tons of photographs at
http://groups.yahoo.com/group/STONYCREEKS-TEC-9/?guide=155692199
There is a link for this group on our front page. (TEC9 GROUP)


I have a M11A1 .380 or a M12 .380, Do you make parts for this firearm?

Yes, we have the Side Cocker Uppers with or without the H&K Sighting system for it. Our stocks and front tactical grips will also fit. We also make the longer M12.380 uppers which are the same length as the M11/9 uppers. All our .380 uppers have the 6" barrel, no longer barrels are available at this time.


I have a POWDER SPRING M10/45 lower receiver and need to have the special barrel notching operation for my extractor to work. Will Stonycreek do this for me?

Yes, we will do this operation at no extra charge. Just be sure to include a note on your order that you need it done. There are no other manufactures we know of doing this procedure. You will also need the M10 two-piece split receiver pin.

I have a TEXAS MAC, Do you make uppers for these?

The way to tell which upper you need is to remove your current upper, look
into the lower receiver where the current receiver pin goes. (This is the
pin that holds the upper to the lower) if yours has a re-enforcing plate
welded to the inside area where the pin goes thru, (down one wall, acrossed
the bottom, up the other wall) you can purchase a normal M10/9 upper. If
there is no plate you may need the Texas mac upper as it is wider in that
area to take up the needed space.


Do you have parts for my H&K sight assemblies?

Yes, we have all the springs, screws, washers and any other sight part you may need if one is lost or broken.


I scratched my upper; will you be able to refinish it for me?

Yes, we can do that for you for a nominal fee. Email us for shipping instructions.


Will Stonycreek be able to re-finish my lower receiver?

Sorry, here in lovely Connecticut we cannot get your lower receivers as the State has deemed even semi-autos an assault weapon. You may want to ask a local gunsmith or metal refinisher for that operation.


I have other questions that this FAQ board did not answer.

Just email us with any questions you might have.